OUR RANGE

Pointing Mix (Sand and Cement ) 3 Sq m bag

IF WE DO NOT HAVE THE QUANTITY YOU REQUIRE PLEASE CALL FOR LEAD TIMES.

Our Price: £11.50(Exc. 20% VAT)(£13.80 Inc. VAT)

–+

PRODUCT CODE: EBMM25
Brand: Slimbrick
Product Type: Pointing Mortar
Suitability: Interior and Exterior
Accessories Used For: Brick Tiles and Corners

Weight: 25 kg

Availability:

In stock, immediate despatch

Product Description
Brick Tiles - What To Order
Free Samples
Discounts

A perfect standard sand and cement mortar mix, suitable for pointing all of the Slimbrick range of Brick Slips. A factory blended mix of sand, ordinary Portland cement and enhancers, gives excellent results every time. Handy 25kg bag size for convenience and less waste. Ready to use... Just add water!

Can be used with our Ultrapoint Pointing Gun

Please note - not suitable as an adhesive. This is for pointing between the bricks only.

HOW TO USE

The product is ready-to-use - just add water and mix. Mixing may be done by hand, using a traditional concrete mixer, or by a suitable continuous mixer. Over-mixing should be avoided.
If using the entire bag you would mix the contents with approximately 4 to 5 litres of clean water so adjust the amount of water pro-rata for smaller quantities of dry mortar. Small adjustments to the volume of added water may be made to adjust the workability. Add a little water at a time until the required consistency is reached. Too much water reduces strength, durability and bond.
Coverage for one bag is approximately 3 sq m (the bag states 30 bricks but that is for full brick laying).

FOR BRICK TILES ORDER

1. Flat brick tiles.
2. Corner tiles, if appropriate but only for external corners (internal corners are made by butting the flat tiles at 90 degrees).
3. Adhesive. Make sure you choose the right one from the descriptions. Eg. if heat is involved, or the wall is outside then a cement-based adhesive is essential.
4. Pointing Mortar.
5. Bags of spacers as required.

CALCULATING AREAS AND QUANTITIES

We can help you if you call 0115 853 1983 but if you wish to work it out yourself follow these guidelines.

First calculate your entire area to be covered in square metres. We then recommend you add at least 10% for wastage and breakages.

Then measure the linear length of any external corners, if any, then:

a. Multiply the area by 2 to calculate the quantity of 1/2 Square Metres required. Eg. For 4 square meters buy 8 x 1/2 metres of flat tiles.
b. For external corners you will need to buy 12 corner tiles for each linear metre. Eg. for 3 Linear metres you require 36 tiles.
c. If using corner tiles, for each 20 corner tiles subtract 1/2 sqm flat tiles. Eg. for 5 linear meters of corners, which is 60 tiles, you would subtract 3 x 1/2 sqm flat tiles.

Adhesives and Mortar

The coverage is shown on the individual products.

Most styles are available as free samples.

We strongly urge you to order samples before purchase, so you get a feel for the quality, style and colour. As you browse our site please take note of the products that interest you and then order FREE samples here. You have nothing to lose!

Free samples normally arrive within 2 days.

Paid sample packs are usually next day delivery (if ordered before noon).

Many products attract a discount depending on the quantity you order. Discount bands are shown on the individual product page if applicable to that product. Any applicable discount is also shown on the Checkout Page. Sale items do not usually have a volume discount associated with them because they have already been discounted. Trade - please call (we may request your Company Number or UTP Number).